The EdgePoint Products are self-contained rugged cellular sensor hubs and gateways. They are designed for stand-alone operation in industrial and agricultural applications.

These devices connect directly to a variety of sensors and report their measurements to the Cloud over the cellular network. Some of them also have digital communications channels for connection to controllers, drives, PLCs and digital sensors. This simplifies the addition of monitoring to new and existing systems.

The EdgePoint Products support several wireless protocols, including Wi-Fi, Bluetooth Low Energy, Thread, and Wi-Fi HaLow. CAT-1 or CAT-M1 cellular modems connect the devices to cloud servers. They also have GPS for positioning services.

Housed in IP67 / 68 enclosures, the EdgePoint Products are designed for harsh industrial and outdoor environments. This makes these rugged cellular sensor hubs and gateways ideal for adding monitoring to agricultural and industrial IoT applications.

EdgePoint RTU Cellular Gateway and Sensor Hub

The EdgePoint RTU is a cellular gateway and sensor hub designed for outdoor and industrial applications. RS-485, RS-232, Dallas 1-Wire and six inputs give it the ability to connect directly to a wide array of digital and analog sensors and equipment for live monitoring.

EdgePoint Industrial Cellular Gateway and Sensor Hub

The EdgePoint Industrial is an industrial cellular sensor hub and gateway designed for 110 / 220VAC systems that need to monitor a large number of inputs. It has 16 digital on / off 110 / 220VAC inputs, two 12VDC inputs, one 4-20mA input and three relay outputs. In addition, it has three inputs that are either 1V current transformers or 4-20mA inputs, based on switch selections. Ten digital output current sinks can be used to activate external relays, lights or horns.

TrackPoint Mobile Cellular Tracker and Sensor Hub

Nexcomm System’s TrackPoint Mobile cellular tracker and sensor hub is a small, cellular gateway designed for outdoor tracking and sensing applications. It uses an integrated GNSS receiver and reports its location through a CAT-M1 cellular modem. Dallas 1-Wire and one input give it the ability to connect to sensors for live monitoring of equipment.

Nexus Industrial Cellular Gateway and Router

The Nexus Industrial cellular gateway and router is designed for industrial and outdoor applications. It is designed as a communications hub, able to connect to a variety of sources and link them to cloud servers for bidirectional monitoring and control. It is the central hub of the Nexus System, connecting a variety of SensePoint sensor nodes to the Internet.

Nexus Panel Cellular Gateway and Router

The Nexus Panel is a small, industrial panel cellular gateway designed for industrial panel applications. RS-485 and USB ports allow it to connect to a wide array of PLCs, controllers, sensors and other equipment for real-time bidirectional monitoring and control. A single digital input can be used as an alarm or trigger and a single digital output can be used for signaling external devices.